ABB_800xA学习笔记187：System_800xA_Control_6.0_AC_800M_Getting_Started_27-第四章硬件配置1
2023-11-27 18:51阅读：
开始第四章的学习，第四章学习硬件配置。
Section 4 Hardware Configuration
This section teaches you how to add or remove hardware units
from the tree structure in the Project Explorer. It
covers the necessary steps for building a
software model that represents a limited part
of a hardware configuration in the
plant.
本章教授你如何从项目浏览器的树型结构中添加和移除硬件单元。它涵盖了创建软件模板的必要步骤，表示工厂中硬件配置的有限部分。
Configure Hardware
配置硬件
Study the hardware configuration in Figure 32. Assume an AC
800M controller, together with six I/O modules. We are
going to add two of them (DO814 and DI810) to
the tree structure in Project Explorer. The modules are placed at
positions 1 respective 2.
学习图22的硬件配置。假设使用AC800M控制器，以及6个IO模板。我们将添加其中两个(DO814
和 DI810)
到项目浏览器的树形结构。模板置于位置1和位置2.
Figure 32. Hardware position for IO modules (for example DO814 at
position 1 and DI810 at position 2).
图 32. IO模板的硬件位置（比如DO814再位置1，DI810再位置2）
Changing a CPU Unit
修改CPU单元
You must have the same CPU unit connected in Project Explorer as in
the physical
controller, otherwise you cannot download
your application to the Controller. However, if
you run with a SoftController with hardware simulation, the choice
of CPU models is optional.
你必须有项目浏览器中的同款CPU的控制器实物，否则你不能下载你的应用到控制器。但是，如果使用具有硬件模拟的
SoftController 运行，则 CPU 型号的选择是可选的。
In this example, a default CPU PM860 will be replaced with a
CPU PM864.
在这个例子，默认的COU PM860替换为PM864。
To replace a CPU:
为了替换CPU
1. Expand Controllers > Controller_1
> Hardware AC 800M until you see the PM860 / TP830 item in the
Project Explorer tree.
再项目浏览器树中展开控制器>控制器1>硬件AC
800M单元直到你看见PM860/TP830。
2. Right-click the PM860 / TP830 item and
select Replace Unit in the context menu. A ‘Replace’ window
opens.
右键电机 PM860 /
TP830元件，在关联菜单选择替换单元，打开替换窗口。
3. Expand Connected Libraries and select,
for example PM864/TP830
展开连接的库，选择，比如
PM864/TP830
4.
Click Replace and then Yes to accept the change
电机替换按钮，然后点击确认接受更改。
Adding the IO Modules DO814 and DI810
添加IO模块DO814和DI810
The S800 IO modules are represented in Control Builder as hardware
types located
in the hardware library
S800IOModulebusHwLib. Thus, before adding the IO
modules you must first insert the hardware
library to your project. Once the library has
been inserted to your project you can connect it to your hardware
configuration and then access the IO modules
and add them to your controller configuration.
S800 IO在Control Builder
中表示为硬件库S800IOModulebusHwLib当中的硬件类型。因此，在添加在添加IO模块之前，你必须在你的项目中插入硬件库。一旦在你的项目中插入库，你可以连接它到你的硬件配置，然后访问IO模块，添加它们到你的控制器配置。
To insert and connect a hardware library:
为了插入和链接硬件库：
1. Expand Libraries folder, until you see
Hardware folder in the Project Explorer tree.
展开库文件夹，直到你在项目浏览器树中看见硬件文件夹。
Figure 33. The hardware folder located inside Libraries folder in
the Project Explorer
图 33. 硬件文件夹位于项目浏览器的库文件夹中
Among the hardware libraries listed under the Hardware folder, the
S800IoModulebusHwLib library contains S800 IO units for the
Modulebus.
在硬件文件夹的硬件库列表，S800IoModulebusHwLib库包含用于
Modulebus的S800
IO的模板。
2. Expand Controllers > Controller_1
until you see the Connected Libraries folder in the Project
Explorer tree.
展开控制器>控制器1直到你在项目浏览器树看见连接的库文件夹
3. Right-click the Connected Libraries
folder, select Connect Library, and select S800IoModulebusHwLib
from the window.
右键点击链接的库文件夹，选择连接库，从窗口选择S800IoModulebusHwLib
4. Click OK
点击OK
Figure 34. The new S800IO library has been connected to the
controller
图 34. 新的S800 IO库已经连接到控制器
Adding the IO modules from the hardware library:
从硬件库添加IO模板
1.
Expand Controllers > Controller_1 > Hardware AC
800M > PM864/TP830 until you see the ModuleBus item in the
Project Explorer tree.
展开控制器>控制器1>硬件AC800M>M864/TP830，直到你在项目浏览器树看见ModuleBus组件。
2.
Right-click the ModuleBus item and select Insert Unit in
the context menu. A ‘Insert Unit for ModuleBus’ window opens.
右键点击ModuleBus组件，在关联菜单选择插入单元，打开了插入ModuleBus单元窗口。
3.
Expand Connected Libraries > S800Io ModulebusHwLib
> Hardware types and select DO814.
展开连接的库>
S800Io ModulebusHwLib
>
硬件类型，选择DO814
4.Keep default position 1 from Position drop-down menu and click
Insert.
从位置下拉菜单中保持默认的位置1，点击插入按钮
5.
Scroll up-down in the list and select DI810.
在列表中上下滚动并选择 DI810。
6.
Keep default position 2 from Position drop-down
menu and click OK.
从位置下拉菜单中保持默认的位置2，点击插入按钮
When you have added the two IO modules, your “hardware tree” should
look like the configuration in Figure 35.
当你添加两个IO模板，你的硬件树将如图35所示配置
Figure 35. Hardware setup (Project Explorer).
图 35. 硬件设置（项目浏览器）
To remove a hardware unit, right-click the object in the tree
structure and select Delete.
要移除硬件单元，在树形结构中右键点击对象，选择删除。
