ABB_800xA学习笔记200：System_800xA_Control_6.0_AC_800M_Getting_Started_40附件A-5
2023-12-02 19:45阅读：
继续学习入门手册附录A
Download New Project to Controller
下载新项目到控制器
When you select Tools > Download Project and Go Online, the
Confirm Deletion
of Project dialog is displayed if
there is another project in the controller. To reset and
restart the controller, click Complete Reset in
the dialog. See Figure 61.
当你选择工具
>下载项目转在线，如果控制器中已经有了项目将显示确认删除项目对话框。为重置和重启控制器，在对话框点击完全重置，见图61.
Another way to reset and restart the controller is to press
controller’s INIT button for more than 3
seconds.
另一个重置和重启控制器的方法是按下控制器ini键超过3秒
Figure 61. Confirm Deletion of Project dialog
图 61. 确认删除项目对话框
When downloading to a High Integrity controller, a complete reset
cannot be done from this dialog. The Complete Reset button will be
dimmed.
当下载到高性能控制器，无法从此对话框完成重置，完全重置按钮将变暗。
The controller will then be reset, all existing applications in the
controller will be
deleted, and the controller will be
restarted. The download of the new project can
then be continued (as described in General
Download on page 101.)
控制器将被重置，控制器中存在的所有项目将被删除，控制器将重启。然后可以继续下载新项目（如同101页常规下载所描述）。
Download Project to Selected Controllers
下载项目到指定的控制器
For a project that contains more than one controller, it is
possible to choose which controllers to download and
go online with. In this way, certain applications and
controller configurations can be excluded from
the download, and you can go online with only a
sub-set of the project to a selected controller. This reduces the
compilation time.
对超过一个控制器的项目，可能要先择下载到哪个控制器转在线。这种情况下，某个应用程序和控制器配置可以从下载中被排除，你可以将项目的部分关联到选定的控制器。这将减少编译的时间。
When working in a multi-user environment, one user can work
with some parts of the project, while other users are
working with other parts. If the other parts of the
project cannot be compiled since they are not
finished, the user will still be able to go
online with parts that are finished.
在多用户环境下工作，一个用户处理项目的某个部分，其他用户处理其他部分，该用户可以在线处理已完成的部分。
If an application is connected to several controllers, it is
not possible to select only one controller. The
remaining controllers will be added
automatically.
如果应用程序连到多个控制器，不可能只选一个控制器。其它控制器自动添加。
If you select Tools > Download Project and Go Online for a
project with more than one controller, the Selection
of Controllers dialog will be displayed. For
example, in Figure 62, “Controller_2” and
“Controller_3” cannot be separately selected or
excluded since one application is connected to both these
controllers.
如果你为一个多控制器项目选择工具>
下载项目转在线，显示选择控制器对话框，如图62，如果一个应用连到这两个控制器，'Controller_2'和'Controller_3'不能分开选择或者排除。
Figure 62. Selective of Controllers dialog
图 62. 选择控制器对话框
Another way to select a specific controller is to right-click the
controller in Project
Explorer, and select Download
and Online Mode.
另一个选择特定控制器的方法是右键点击项目资源管理器的控制器，选择下载转在线。
The Selective Download function is by default enabled, but
can be disabled by selecting Tools > Setup >
Station > Application Download, and in the Setup
dialog setting the parameter
SuppressOnlineSelectionDialog to true.
默认情况下启用了选择向下在功能，可以通过选择工具>设置>站>应用下载，在设置对话框设置参数
SuppressOnlineSelectionDialog来禁用。
Selecting an Application to Download
选择一个应用下载
Besides connecting several applications to one controller and
download them, you can also select just one of these
applications for download. This is convenient when
some parts, for example in Application_1 are
not ready but everything in Application_2 is
finished and ready for testing. If both applications are connected
to Controller_1, you will be giving a chance to
select if both applications should be
downloaded or just
Application_2.
除了将多个应用程序连到一个控制器并下载它们，你还可以选择下载其中一个应用程序。这很方便，例如当应用程序1的某些部分没有准备好，但是应用程序2全部完成准备测试。如果两个应用程序连接到控制器1，你将有机会选择是下载全部，还是只下载应用程序2.
1. Click Continue-button in Figure 62, an
Online Analysis window will open
在图62中选择继续按钮，打开在线分析窗口。
2. Select the application to be
downloaded. See the example in Figure 63.
选择要下载的应用程序。见图63中的例子。
Figure 63. Connected applications to a controller. Only Application
2 will be downloaded.
图 63. 连接应用程序到控制器，只下载应用程序2
